FIRE HYDRANT Dry Barrel

The standard version of BIMEX dry barrel fire hydrant is engineered for reliability and performance, ensuring optimal functionality in critical fire protection systems. The hydrant represents the break-even perfect balance point between performance and cost effectiveness.

DESIGN FEATURES

Dry barrel type
Breakaway design to prevent accidents to the Hydrants, where only the upper part of the flange will be broken upon impact.
Designed as per AWWA C502, which applies to the wall thickness, loss of head, and hose connection plugs.
Simple, rugged construction and easy to maintain.
Available in 3-outlet version and 2-outlet version.
Maximum Working Pressure: PN16 / 16 bar
Flanged Joint standard: EN 1092-2 PN16
Outlets: 2 x 2 1/2″ (65 mm) hose nozzles, and 1 x 100 mm pumper nozzle
Inlet: 3″, 4″, or 6″ flanged joint
Working Temperature: 0.5° – +95 °C
Opening Direction: Counterclockwise
Color: RAL3000 or RAL3002
Epoxy powder fusion coating inside and outside at least 300 μm thickness
Quality control: All hydrants are tested hydrostatically at BIMEX
Material and test certificates can be provided
Body test = working pressure x 1.5. Seal test = working pressure x 1.1

Specification

Description	Material
Hydrant Body	DUCTILE CAST IRON GGG50
Lower Body	DUCTILE CAST IRON GGG50
Gasket	NBR
SQ Nut	Ductile iron GGG50
WEDGE	DUCTILE CAST IRON GGG50 coated with non-toxic NBR RUBBER
Stem	SS304 / SS316 / SS316L
Operating Cap	Ductile iron GGG50
Nut	Ductile iron GGG50
Wedge	Ductile iron GGG50, EPDM
Stem	Stainless stee
Nuts	Brass
Plug	Ductile iron GGG50
O-Ring	NBR
Screw	Stainless steel
Nuts	Brass
Nuts	Brass